The KD2 Internal Single Sided Wall Kerb is designed to support a hygienic wall panel above a finished floor surface.
Once installed, the KD2 reduces the ingress of liquids to the building structure and offers impact protection to the block walls and columns against factory traffic.
The wall kerb has an upturned profile lip, which has fixing holes along its length for fixing to fire rated wall panels.
Similarly to the KC wall kerb range, the KD2 has a 9mm foot, which is designed to suit a 6-9mm resin flooring finish.
The wall kerb is fully welded and fabricated in sections to suit sliding, personnel and roller doors, wall corners, tees and wall ends.
The profile of the wall kerb is dependent on the wall thickness requirements. Aspen is able to fabricate the KD2 wall kerb profile to a custom size according to the requirements of each project.
The wall kerb is installed onto the floor surface using resin anchor fixings, which is then infilled with C30 concrete.
Internal Single Sided Wall Kerb Technical Specification
- 2mm 240 grit stainless steel.
- External Channel Back Plate: Galvanised mild steel.
- C30 concrete infill.
- Resin anchor fixings
- Grade 316 stainless steel (British Standard 316S31, Euronorm 1.4401).
- British Galvanised Standard BS EN ISO 1461:2009.
- Compliant with EHEDG guidelines